Wooden Hair Brush Quality Control: How to Approve Colour, Grain and Finish

Approve a finished wooden brush and agree the lightest and darkest finishes you will accept. Use those references to check colour, grain and logo contrast on the bulk handles.

What four photographed wood samples show

Four photographed samples labelled Beech, Walnut, Golden Sandalwood and Green Sandalwood, each with a grain close-up
Beech, walnut and two Sandalwood Series samples, photographed individually. Open the full-size wood comparison.

Use these photographs to discuss the base tone and visible grain when you choose a material. Each panel shows one piece. Set limits for your order using finished handles from the same wood and finish you have selected.

Photographed sampleVisible colourVisible grain
BeechLight beige-brownFine flecks
WalnutChocolate brownLengthwise grain
Golden SandalwoodWarm dark brownFine golden-brown streaks
Green SandalwoodOlive brownWavy grain

Golden Sandalwood and Green Sandalwood are sample product names. Confirm the material identification separately if the buyer specification requires an exact species or origin.

Sign off the light and dark limits

Start with the finished handle. Sign off the wood, surface finish and logo together. Keep labelled appearance references for the person who will inspect the order.

Approve a finished reference brush in the chosen wood and surface finish, with the actual logo in place. The sample approval guide explains how to label and retain the golden sample. Ask if extra finished handles are available for the light and dark limits. Compare them at the same angle and distance, under the light the inspector will use.

Illustration of a three-piece reference set
Light limitLightest acceptable finish
Reference brushApproved model, finish and logo
Dark limitDarkest acceptable finish

Sign the actual pieces as the standard for your order. Add an example of acceptable streaking if it matters. Where logo contrast is important, inspect the actual mark on both limit samples.

What to record on the approval sheet Model and finish · reference brush ID · light and dark limit IDs · grain reference if used · light, distance and viewing angle · reviewer and date.

Make a decision on each finished handle

Inspect the grip, head edges and any holes or seams by sight and touch. Record surface faults separately from variations in tone or grain. The full brush QC checklist covers the other checks for pins, cushions and packaging.

Accept

The finish meets the signed limits. The handle feels smooth and the logo is readable.

Hold for review

A tone is close to the limit, or a streak makes logo contrast hard to judge. Compare it beside the nearest reference and record the named reviewer’s decision.

Record a nonconformance

The piece is clearly outside the range or has a defect such as a splinter, crack or chipped edge. Record the location and separate the affected pieces for the agreed disposition.

When you hold a piece, record the model, lot, reference ID and what needs judging. For example, “dark streak across the logo on the back of the handle” gives the reviewer a specific area to compare.

Apply the references during bulk inspection

HaircareCN uses 100% visual checks alongside sampling at AQL 2.5, General Inspection Level II. Use the signed references to judge the handle’s appearance. Follow the applicable inspection plan for sampling, defect classification and lot acceptance. Third-party inspection is welcome.

See how the handle changes what you inspect

These two existing brush styles show different surfaces to check on your own sample. Open the product page to see the handle shape and construction.

Beech wood air-cushion hair brush
Beech cushion brush
Compare the finish on the broad back and grip.
Front and leaf-carved back of a walnut cushion brush
Carved walnut cushion brush
Check the carved edges and recessed areas after finishing.
About HaircareCN
HaircareCN supplies custom hair brushes and combs for OEM and private-label programmes. Send your brush model, finish reference and logo artwork so we can review the sample and what to check before bulk production.

Frequently asked questions

Can I approve wood colour from a photo?

Use photos to discuss the visual direction. Approve the finished physical sample and the accepted range under agreed viewing conditions before bulk production.

When is a difference in wood grain a defect?

Grain within the approved range can be accepted when the piece meets the agreed finish and logo criteria. Hold borderline pieces for review and record surface faults or clear deviations against the approved sample.

What should I send to request a wooden brush sample?

Send the brush model or shape, wood and finish preference, logo artwork and placement, and quantity by size and colour. Include a photo or physical reference for the tone you want.

In This Article

OEM & Private Label
Samples for Brushes, Combs & Clips
Eligible stock samples are free (buyer pays shipping). Custom samples are quoted by project.
Request a Sample or Quote →

Related Posts

Practical guides covering material selection, MOQ planning, certification requirements and market trends — written from 25+ years of hands-on experience manufacturing custom hair brushes, combs and accessories for global brands.

Request a Sample or Quote

Start Your Custom Hair Accessories Order

Tell us the product, material, quantity per colour and logo method — our team will send an itemised quote within 24 hours on working days. Every enquiry gets a dedicated contact, not a generic reply.

Email Us

haircare@junyibeauty.com

For detailed enquiries, spec sheets & documents

Call Us

+86 134 1858 4007

We respond to all enquiries within 24 hours

WhatsApp

+86 134 1858 4007

Fastest response

Product Catalogue
Download Our Full Product Catalogue
Hair brushes, combs & accessories OEM & private label options
Claw clips, scalp brushes and hair clips beside product sketches
OEM & Private Label
Get a Sample & Quote
Reply within 24 hours No commitment required